Are you looking for steps to clean Dyson cordless vacuums? Let’s talk about that.
Dyson provides some of the highest performing vacuum cleaners to many households. By making light work out of a range of messes, maintaining a clean and sanitary home is easier than ever before.
Something that makes Dyson vacuum cleaners stand out even more is the fact that the cordless vacuums are easy to clean.
They have been designed to be easy to take apart and reassemble when needed.
Here is how you can keep your Dyson cordless vacuum clean and how to safely reassemble afterwards.
How To Clean Dyson Cordless Vacuums
Step One: Take It Apart
The first step when you want to clean your Dyson vacuum is to check that everything is switched off and unplugged.
While this is less of a pressing issue for cordless vacuums, it is recommended that you switch off the charging dock before wiping it clean.
Then, you will need to start with emptying the canister.
Red levers or handles are a general indicator that something can be removed, but you should take a closer look into the specifications for your particular model of cordless Dyson vacuum.
However, most canisters are easy to locate underneath the cyclone.
Carefully remove this container and empty it into the trash. You may need to shake the canister a little to loosen any dust or debris on the sides.
Using a slightly damp microfiber cloth, you can then remove any smaller particles left in the canister before leaving it out to dry.
It is highly recommended that you do this outdoors to avoid spreading dust around your home.
Once you have done this, you can begin to take the rest of the vacuum apart for cleaning.
If you can find a button or lever that says filter, you can use this to remove the filter. Take the stick off of the main frame, and remove the brush head from the main body of the vacuum.
Step Two: Clean The Filter
The next thing that you need to do is clean the filter. When the canister is drying, you should tap the filter on something hard to loosen up larger pieces of dust.
Then, rinse it under cold running water before filling it with warm water.
Once this is done, you can cover the filter openings with your hands and gently shake the whole thing.
Repeat this process until the water runs clear when you tip it out. Then, you can leave it out to dry completely.
Step Three: Wash The Brush Bar
Now that you have cleaned your filter, you can check the brush bar for long hair that is tangled. Use a coin to unlock the brush bar at the end of the vacuum head.
Then, you should be able to gently pull the brush bar out.
Once you have done this, you can use a pair of high quality scissors to snip away any hair that has gotten caught around the bristles.
This is an essential part of cleaning your Dyson vacuum because it can limit how well the brush bar is able to move efficiently.
While the brush is out, you can also wipe inside the vacuum head clean with a damp microfiber cloth.
Step Four: Unclog The Hose
Next it is time to take a look at the hose. If your Dyson model allows it, detach the hose from the wand and use a microfiber cloth to clean the inside and outside of the tube.
You can also push the cloth into the hose further using a long broom handle or something else that is lengthy.
Removing any blockages from the hose is essential because these can limit your Dyson vacuum’s performance and energy efficiency on the whole.
Using vinegar and warm water, you can submerge the hose for around ten minutes. This is a great way of removing smaller pieces of dirt and bacteria. Before hanging to dry, make sure you rinse with water and wipe.
Step Five: Clean The Attachments And Exterior
Finally, it is just as crucial to clean all the attachments for your Dyson vacuum cleaner.
Dust and hairs can get trapped in the tools, so you should carefully pull these out. After all the visible dirt is gone, you can wipe over everything with a damp microfiber cloth.
You can also use the damp microfiber cloth to wipe the exterior of your cordless Dyson vacuum.
It is surprising how much dirt can be removed during this process, because the exterior is more exposed to household mess, stickiness from food, and more.
This is especially true when the Dyson is charging at its docking station, because children and pets are likely to investigate and want to touch it.
Make sure that you leave all the parts of your vacuum cleaner out to dry completely before reassembling.
The filter can take 24 hours to get dry, but it needs to be left before putting back in. This is because the Dyson will not switch on if it has a damp filter.
Step Six: Assemble
Once everything is clean and dry, it is time to reassemble your Dyson vacuum cleaner.
Depending on the type of cordless vacuum you have, this will vary. However, the filter can usually be inserted by turning it clockwise to lock in place.
Next, you can slide the clear bin over the cyclone and push until they click.
You can then place the roller brush back into the vacuum head, reattach the hose, and screw it all together if you unscrewed anything in the first place.
Make sure you test that your Dyson is working correctly afterwards.
Summary – Clean Dyson Cordless Vacuums
A dirty vacuum cleaner is far less effective at keeping your home clean.
When a cordless Dyson vacuum is not maintained properly, mold can form deep inside the mechanism.
Consider eliminating harmful bacteria and keeping everything sanitary by regularly cleaning your Dyson cordless vacuum. You will be surprised by how well it will perform as a result.