Let’s learn how to empty a Dyson V11.
When it comes to having a great vacuum cleaner, you simply won’t be able to beat Dyson.
These vacuum cleaners come with a bagless design that makes them much easier to empty. However, there are many different models of Dyson.
With each different model of Dyson comes a different bag opening procedure.
If you have a certain model, then you might be mistaken for thinking that it opens the same way as the others. This is why knowing how your model opens is important.
So how can you empty the Dyson V11? What about the other models of Dyson? How can you empty them all effectively? What is the best way to empty a cordless vacuum cleaner?
Well, if you want the answers to all of these questions and more, we would suggest you keep reading.
What To Bear In Mind About Emptying All Dyson Vacuums
One of the main things to consider is that when you are vacuuming that you do not wait for your bag to become full to capacity.
If you leave your vacuum cleaner to get full to capacity, then you might notice a loss of performance, causing suction loss which will then make it difficult to draw up large clods of earth.
Once your dust cup is near to filling, then we would suggest that you unclip it and empty it into an outside bin. This is because you can get many stray particles and dust that could affect people with allergies.
The Best Method Of Emptying Cordless Vacuum Cleaners
If you are using a cordless model, you’ll probably have already noticed that the dust cup is a lot smaller than you might find on other models. This is because the cordless models have less power and do not suck up as much dust.
The Dyson V7 and V8 are cordless models and there is a particular system for emptying them that we will outline below:
1. Unplug the vacuum – this will make sure that you do not give yourself any electric shocks while you are unclipping your dust cup.
2. Remove apparatus – remove any apparatus such as the nozzle and the tube that might be getting in the way of your dust cup.
3. Push the cyclone down – when you do this, make sure that the vacuum is held over a bin as it can often discharge dust particles.
4. Shut the trap – push the manual trap door back into its housing until it clicks. Only do this when the cyclone is back in place.
How to Empty a Dyson V11
Once the Dyson model progresses beyond the V8, then you’ll have to deal with a more advanced emptying system.
The body of the vacuum will be in line with the wand, so you’ll have to employ a different method for emptying. This goes as follows:
1. Remove the wand – take away any apparatus that might be obscuring your dust cup. In the case of the D9, D10 and D11, you will have to remove the wand before you empty it.
2. Hold the vacuum over a bin – we would recommend doing this outside, as there will be a lot of debris detached when you empty this bin.
3. Open trap door – press the trap door of this vacuum and let the dirt get forced out by the mechanism.
4. Detach canister (optional) – if you want to open the canister to give it a clean, then you can press a button on the housing of the vacuum itself.
5. Close the trap door – press the trap door on the bin until it clicks back into place. Then you should be ready to use your Dyson all over again!
Emptying The Dyson Omni Glide
This next model of Dyson is one that has been specially designed for vacuuming hard floors. Here is a step-by-step guide for emptying it:
1. Unplug the vacuum – in much the same manner as the other Dysons, you should start by switching it off at the wall. This way you can prevent any unwanted shocks.
2. Detach wand – you’ll need to make sure that your dust cup is completely unobstructed before you decide to empty it.
3. Hold the Dyson over a bin – make sure that there is a large bin to collect the dust that comes from your vacuum cleaner. You don’t want any stray dust going on your clean floor.
4. Open the trap – once this is done, then you should open the trap and wait for the dust to collect.
5. Shut the trap – once the cup is completely clean, then you’ll need to click it back into place until you hear it click.
Emptying Dyson Cleaners With A Cord
If you have a corded cleaner, then you’ll have to deal with a totally different emptying system all over again. Here is another step-by-step guide:
1. Unplug the vacuum cleaner – again, this is so that your vacuum will not turn on when you are emptying it into the bin.
2. Detach the canister and cyclone – this is done by pressing a small button above the canister and lifting it away from the vacuum housing.
3. Hold over bin – again, we would recommend doing this over an outside bin to prevent any spillage into your house.
4. Click the handle button – once this is done, then you can begin shaking the dust into the outside bin.
5. Close the trap – once the vacuum is completely empty, then you can click it back into the housing.
Emptying The Dyson Small Ball Allergy
Here is a step-by-step guide for emptying the Dyson Small Ball Allergy model:
1. Unplug the vacuum cleaner to avoid any shocks or the vacuum turning on as you empty it.
2. Detach the canister – by pressing the red button on the bin, you’ll be able to remove the canister from the vacuum.
3. Hold over the outdoor bin – place the vacuum deep into the bin to avoid any dust blowing into your face.
4. Press the red button again – press this until the dust falls out of the vacuum and into the bin. Shake it until all the dust and dirt are detached.
5. Close the trap door – reattach your canister to the vacuum. It will click when it is attached firmly.
Conclusion
We hope that our handy guide for emptying your Dyson V11 and other models has helped you when you are next cleaning out your vacuum.