Do you need tips and tricks on how to empty Dyson ball vacuums? Let’s talk about that.
Dyson is known for their high quality vacuums, and the Dyson Ball vacuum is no exception.
If you’ve just bought a Dyson Ball vacuum, you might be wondering: How do you empty it?
In this article, we will explore some important information about Dyson Ball vacuums, including how to empty one.
Keep reading to find out more.
How To Empty Dyson Ball Vacuum
You will need to empty your Dyson Ball vacuum as soon as the dirt reaches the MAX mark.
It’s essential that you don’t overfill the vacuum and continue vacuuming once it reaches this line, as this can lead to problems later down the line.
Step One – Remove The Clear Bin & Cyclone
To begin, you will need to press the red button in order to release the bin and cyclone from your vacuum.
Step Two – Open The Clean Bin
Once you have removed the clean bin and cyclone, you will need to push down on the red button to push the bin assembly down and to clear the shroud.
Step Three – Empty The Clear Bin
Now it’s time to empty the bin. The base of the bin won’t be able to open until the bin assembly is fully pushed down.
If you suffer from allergies, you will need to carefully place the contents of the bin into a trash bag and remove it immediately to avoid causing an allergy flareup.
Step Four – Reinstall The Clear Bin
Once you have emptied the dust and debris into the trash bag, it’s time to reinstall the clear bin
Push the bin assembly up until you hear it click. Be wary to not close the bin base just yet.
Step Five – Close The Bin
Close the bin base after the bin assembly has been clicked into place.
Step Six – Reassemble Your Dyson Ball Vacuum
Now you have closed the bin, you can reassemble your vacuum!
Place the bin and cyclone back into place on the machine. Ensure that it’s secure, and you’re ready to use it again!
If you are interested, we also have tips and tricks to empty your Dyson V8 and other models. We also have a guide on how to empty Dyson vacuums in general.
How Often Should You Empty Dyson Ball Vacuum Cleaners?
How often you will need to empty your Dyson Ball vacuum will depend on the frequency in which you use it.
If you are someone that likes to vacuum their home multiple times in one week, then your vacuum cleaner will likely reach the MAX line quicker than someone who only vacuums once a week.
As I’ve mentioned above, you should never allow the dust and debris to exceed the MAX line. This comes down to the fact that it can lead to a variety of different issues, such as your vacuum overheating, if you exceed its capacity.
You want to maintain your vacuum as best as you can to ensure that it’s going to last for years to come. Exceeding the MAX line is a sure-fine way to give yourself a financial penalty.
If you continue doing this, over time you’ll likely need a new vacuum altogether as it will be working hard to suck up more dust but won’t have the capacity to do so. Soon, your vacuum just won’t be fit for use.
If you notice that your Dyson Ball vacuum begins to lose suction, you will probably notice that it’s not picking up dust and debris as well as it normally does.
At this point, you will want to empty the vacuum and clean the filter.
How Do You Clean Dyson Ball Vacuum Filters?
Step One – Remove The Filters
To begin, you will need to remove the filters. To do this, you will first need to flip the tab connected to the cyclone.
Once the filter is visible, you can pull it out to clean it.
Step Two – Remove The Filter Cap
Before you can rinse the filter to clean it, you will need to remove its cap. The cap is held on by small clips that you’ll be able to gently pry it open.
Step Three – Rinse The Filter
Now it is time to rinse the filter. You should never clean your vacuum’s filters with soap. This comes down to the fact that the soap suds can leave a residue and make the filter less effective.
Bearing this in mind, you’ll want to run your filter under cold running water until it begins to run clear.
Step Four – Wring Out Any Excess Water
Once you have thoroughly cleaned the filter with water, you will need to gently wring out any excess water to aid the drying process.
Step Five – Allow The Filter To Dry
You will need to allow the filter to dry completely before you attempt to reinsert it into your Dyson Ball vacuum.
Step Six – Reinsert The Filter
Last, but by no means least, you will need to reinsert the filter.
Now your vacuum is good as new and should begin picking up dust and debris more easily!
If you need help cleaning your Dyson V10 filters, we have tips for that as well.
Remember to clean your Dyson vacuum heads too!
How Often Do You Need To Clean Dyson Ball Vacuums?
Generally speaking, you should clean your vacuum’s filter once a month to ensure that you’re getting the most out of your vacuum.
If you fail to do this, you will quickly realize that your vacuum’s efficiency and effectiveness has begun to deteriorate, and you won’t be able to get a thorough clean.
However, when it comes to maintaining the cyclone assembly or shroud, you should never wash these parts or ever submerge them in water.
Failure to follow this procedure will likely result in you breaking your vacuum by accident, and you won’t get the use out of your investment.
If the exterior of your vacuum is looking dusty, then be sure to give the exterior of your vacuum a wipe with a damp cloth as and when you need to.
In Summary
And that’s how you empty a Dyson Ball vacuum!
Hopefully you now know your way around your Dyson Ball vacuum, and can easily empty it with no trouble!
Be sure to save this article for future reference if you get stuck emptying your Dyson Ball vacuum.